Spring Strap Kit
Includes
2 Springs
2 Heel Protectors
4 Sets Mounting Hardware
Includes
2 Springs
2 Heel Protectors
4 Sets Mounting Hardware
Includes
2 Springs
2 Heel Protectors
4 Sets Mounting Hardware
Features
Automatically adjusts to changing conditions, stays snug on heel.
No more stopping to tighten a loose strap
Durable stainless steel coiled spring strap is practically indestructable
Rubber grip protects heel from spring.
Finger loop is easy to access; even with thick gloves
Manufacture in Japan
-
250mm, Recommended use with fin sizes XS & S (stock length for Bio-fin Pro XS with spring strap)
275mm, Recommended use with fin sizes XS & S (stock length for Bio-fin Pro S with spring strap)
300mm, Recommended use with fin sizes M & L (stock length for Bio-fin Pro M and L with spring strap)
325mm, Recommended for use with sizes L & XL (stock length for Bio-fin Pro XL with spring strap)
-
Spring straps are strong and can place undue stress on a post every time user dons and doffs. Constant pull can wear down or even tear post style attachment commonly used for most fins. Apollo spring straps are designed to install through wall of fins rather than attach to a post.
Permanent installation required. Hardware runs through the foot pocket. If the fins have a post, it must be permanently removed to make room for spring straps. See manual for quick reference.
-
Spring straps are stainless but not stain proof. To ensure hardware remains cosmetically appealing and easy to work with; we strongly recommend occasional disassembly for more thorough fresh water rinse. If staining is present, scrub lightly with brush. If necessary, add baking soda to water for more thorough scrub.
Use the correct driver. Current fitting is T20 (Torx 20). V.1 used PH2 (Phillips Head 2)
If you coat screws with any substance, be aware that oils can cause early deterioration in rubber. Take care to remove residue from fins.